Norma Reloading Brass 6.5 PRC, is the gold-standard of cartridge cases. These cases start off with the best possible raw materials with the narrowest tolerances. The case necks are annealed to soften the brass and prevent gas leaks the case body is at the optimum hardness to avoid any unnecessary stretching. New, unprimed brass that features chamfered and deburred case mouths and a punched flash hole. Norma-Reloading-Brass-Habitat-Africa Norma Reloading Brass 6.5 PRC Features Norma Reloading Brass is synonymous worldwide for very high quality. Cartridge cases is an important component in Norma’s reputation. Superior quality ensures a long life and many reloads. Norma reloading brass cases are manufactured with only the very best available raw materials. Most raw materials that arrive at Norma are first sent to the receiving inspection in the lab, which then determines when the right criteria have been reached, in order to start up a new run in the production and more, the hardness, material structure and measurements of the cases are checked, through all processes. The narrowest tolerances and precise specifications deliver accuracy round after round. The most important factor in the case production is quality control. From start to finished case, there are continuous inspections, 15-20 measurements in total, depending on the case. Although Norma use automation in production, of finished cases, five of each 300 cases are taken out for inspection. In addition to this, a final inspection is made where the cases are put through a measuring device and visually inspected. Cases are manually tested to reach 10 loadings at CIP maximum pressures, before being marketed as component reloading brass. New, un-primed brass features chamfered and deburred case mouths and should be sized before loading.